800LXA Specs
Wiring, Installation, Specs, Applications....
800LXA: Data Output Only
The 800LXA is a superheterodyne receiver with a helical resonator antenna pre filter. The 800LXA output is data only for use with the 601A (6CHAN-1) Six channel decoders or with OEM systems where data decoding is built into the system and receiver decoding of outputs is not needed.
Specs
Power
- 800LXA 12-15VDC
- 800LXA5 5V +/-.1V
Current
- 12ma typical
- Data output high 4.5v typical
- Data output low 0.2v typical
- Data Source Impedance 3.3k
Wiring
| Color | Description |
|---|---|
| Red | (+) power |
| Black | (-) power |
| Black | (-) power |
| Blue | Data Output |
The 800LXA is supplied with a type "F" connector for antenna input and extra hardware to allow the unit to be mounted in a security panel or enclosure. The antenna is supplied as a vertical whip with a corresponding type "F" connector.
Applications
The 800LXA is our most economical receiver for use with the 601A/6CHAN-1 decoder. It may be mounted in a receiver panel as long as the reciever panel/processors do not generate a large amoutn of radio interference. Mounting the 800LX is as easy as makeing a 3/8” hole in the panel top to accommodate the antenna connector. Hardware is supplied with the receiver. The result is a professional looking/wireless control. The 800LX can drive several six channel decoders allowing of a typical wired panel to to be converted into a non-polled, supervised wireless system.
To be used with: 601A 6 channel decoder
Also, the 800LXA is inside every NC1000-F unit.
How to place an order
If you are a security installer or dealer you may place an order over the phone (800) 444-3365 or via e-mail.
Please use Alarm Electronics Part No.'s when placing an order.
Placing an order with your special item no. is not always easy to understand.
For Warranty Service (Repairs)
Return postage/shipping prepaid to the Repair Dept.
ALARM ELECTRONICS MFG. CO., INC.
44 ALL HEALING SPRINGS ROAD
TAYLORSVILLE, NC 28681
Return authorization should be obtained prior to the return of any product. An RMA identification number will be issued to keep track of receiving and processing of returned product. Alarm Electronics Manufacturing Co., Inc. cannot be responsible for items returned without prior authorization. For return authorization call: 1-800-444-3365 or send us an e-mail.