Single Channel Extended Range
Superheterodyne technology receiver for use in areas with high levels of radio interference or where extended range is needed. Operates in standard or non-polled supervision modes. Standard Form-C relay output with auxillary output for transmitter low battery. For technical information about Alarm Electronics 811LX click the following link: 811LX Technical Information.
2 & 4 Channel
Superheterodyne technology for use where multiple zones or special output functions are needed. Use the 2 Channel 902L for special functions such as latching outputs, On/Off control, or when high current relay contacts are needed. For technical information about Alarm Electronics 902L click the following link: 902L Technical Information. For technical information about Alarm Electronics 904L click the following link: 902L Two Channel and 904L Four Channel
Data Out Only
The 800LXA receiver front end may be used with the 601A six channel decoder or OEM panels with internal decoding of transmitter key codes. It also provides reconstructed transmitter data output. For technical information about Alarm Electronics 800LXA click the following link: 800LXA Technical Information.
Single Channel Standard Range
Economical super-regenerative technology for use in low to medium range and low interference environments. Standard momentary Form-C relay output. For technical information about Alarm Electronics 809EX click the following link: 809EX Technical Information.
Six Channel Decoder
Use one or more 601A six channel decoder(s) with any Smart-Wave receiver to expand the number of channel/zones. Use more than one to obtain 6, 12 or 18 seperate zones from one receiver. For technical information about Alarm Electronics 601A click the following link: 601A Technical Information.